BJKFJ - LAMINAC 989 POLYESTER RESIN (006081-01)

  • MSDS: BJKFJ
  • Manufacturer: AMERICAN CYANAMID COMPANY
  • Product Name: LAMINAC 989 POLYESTER RESIN (006081-01)
  • National Stock Number: 8030-00N011416
Product Identification

Product ID:LAMINAC 989 POLYESTER RESIN (006081-01)
MSDS Date:04/26/1986
FSC:8030
NIIN:00N011416
MSDS Number: BJKFJ

Responsible Party
AMERICAN CYANAMID COMPANY
ONE CYANAMID PLAZA
WAYNE, NJ 07470-4028
US

Emergency Phone: 201-835-3100

Info Phone: 201-835-3100

Cage: 83289

Contractor
AMERICAN CYANAMID CO CYTEC INDUSTRIES DIV CHEMICAL LIGHT
LITTLE FALLS, NJ 07424 US

Telephone: 201-831-2000/201-357-3100

Cage: 83289

Ingredients

STYRENE, MONOMER (SARA III)

CAS: 100-42-5

RTECS: WL3675000

Fraction By Weight: 35%

OSHA PEL 100 PPM

ACGIH TLV: S,50PPM/100STEL;9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

Hazards

LD50 LC50 Mixture:N/K
Routes of Entry: Inhalation:YES Skin:NO Ingestion:NO
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:HARMFUL IF INHALED.
Explanation of Carcinogenicity:STYRENE:INADEQUATE EVIDENCE FOR CARCIN
IN HUMANS/LIMITED EVIDENCE FOR CARCIN IN ANIMALS (IARC,1987).
Effects of Overexposure:EYES/SKIN:DIRECT CONTACT MAY CAUSE
IRRITATION.INGESTION:N/K .INHALATION:OVEREXPOSURE TO STYRENE VAPOR
MAY CAUSE HEADACHE,NAUSEA,FATIGUE,CENTRAL NERVOUS SYSTEM DEPRESSION
AND IRRITATION OF E YES,NOSE AND THROAT.
Medical Cond Aggravated by Exposure:N/K

First Aid

First Aid:EYES:IMMEDIATELY IRRIGATE WITH PLENTY OF WATER FOR AT LEAST
15 MINUTES.OBTAIN MEDICAL ATTENTION IF IRRITATION
PERSISTS.SKIN:REMOVE CONTAMINATED CLOTHING WITHOUT DELAY.FLUSH SKIN
THOROUGHLY WITH WATER. INGESTION:CALL MD IMMED .INHAL:REMOVE FROM
EXPOSURE.GIVE O*2 IF BREATHING IS DFCLT.GIVE ARTF RESP IF PERS IS
NOT BRTHG & CONTINUE UNTIL NORMAL BRTHG IS ESTABLISHED.GET MED ATTN
W/O DELAY.

Fire Fighting

Flash Point Method:CC
Flash Point:90F,32.2C
Extinguishing Media:WATER SPRAY,ALCOHOL FOAM,CO*2 OR DRY CHEMICAL.WATER
STREAM MAY BE INEFFECTIVE.USE WATER TO KEEP CONTAINERS COOL.
Fire Fighting Procedures:WEAR SELF-CONTAINED,POS PRESS BREATHING
APPARATUS & FULL FIREFIGHTING PROT CLTHG.WATER STREAM MAY BE
INEFFECTIVE.USE WATER TO KEEP CONTAINERS COOL.
Unusual Fire/Explosion Hazard:HAZARDOUS DECOMPOSITION PRODUCTS:THERMAL
DECOMPOSITION OR COMBUSTION MAY PRODUCE CARBON MONOXIDE AND/OR
CARBON DIOXIDE.

Accidental Release

Spill Release Procedures:WEAR PROTECTIVE CLOTHING/EQUIPMENT INCLUDING
IMPERVIOUS BOOTS.COVER SPILLS WITH SOME INERT ABSORBENT
MATERIAL,SWEEP UP AND PLACE IN A WASTE DISPOSAL CONTAINER.FLUSH
AREA WITH WATER.REMOVE SOURCES OF I GNITION.
Neutralizing Agent:N/K

Handling

Handling and Storage Precautions:DO NOT CARRY,STORE OR CONSUME
FOOD,BEVERAGES,TOBACCO PRODUCTS WHERE THIS CHEMICAL IS IN USE.
Other Precautions:AREAS CONTAINING THIS MATERIAL SHOULD HAVE FIRE-SAFE
PRACTICES AND ELECTRICAL EQUIPMENT IN ACCORDANCE WITH ELECTRICAL
AND FIRE PROTECTION CODES (NFPA-30) GOVERNING CLASS I FLAMMABLE
LIQUIDS.

Exposure Controls

Respiratory Protection:NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR
EXPOSURE OF CONCERN .
Ventilation:LOCAL AND GENERAL VENTILATION NECESSARY TO KEEP AIR
CONCENTRATION BELOW TLV .
Protective Gloves:IMPERVIOUS
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:WORK PANTS,LONG SLEEVE WORK SHIRT.EYE WASH
FOUNTAIN AND SAFETY SHOWER.
Work Hygienic Practices:BEFORE EATING,DRINKING OR SMOKING WASH HANDS
AND FACE WITH SOAP AND WATER.LAUNDER CONTAMINATED CLOTHING BEFORE
REUSE.
Supplemental Safety and Health
SPEC GRAV:1.10-1.15 (WATER=1).ROUTES OF ENTRY:INHALATION/SKIN/INGESTION
.

Chemical Properties

Boiling Pt:B.P. Text:N/K
Decomp Temp:Decomp Text:N/K
Vapor Pres:5.2 MMHG
Vapor Density:3.6,AIR=1
Spec Gravity:SEE SUPP DATA
Solubility in Water:NEGLIGIBLE
Appearance and Odor:CLEAR LIGHT STRAW-COLORED LIQUID WITH ODOR OF
STYRENE.
Percent Volatiles by Volume:35

Stability

Stability Indicator/Materials to Avoid:YES
AVOID CONTACT WITH STRONG ACIDS AND OXIDIZING AGENTS.
Stability Condition to Avoid:EXPOSURE TO EXCESSIVE HEAT,SPARKS OR
FLAME.
Hazardous Decomposition Products:THERMAL DECOMPOSITION OR COMBUSTION
MAY PRODUCE CARBON MONOXIDE AND/OR CARBON DIOXIDE.
Conditions to Avoid Polymerization:AVOID EXPOSURE TO EXCESSIVE
HEAT,PEROXIDES,POLYMERIZATION CATALYSTS.

Disposal

Waste Disposal Methods:DISPOSAL MUST BE IN ACCORDANCE WITH
FEDERAL,STATE AND LOCAL REGULATIONS .

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.